Wallpapering a Dresser

Jun 1, 2023

Introduction

Welcome to Frameworks' comprehensive guide on wallpapering a dresser. If you're looking to add a touch of elegance and personality to your furniture, wallpapering is a fantastic option. With our detailed step-by-step instructions, you'll be able to transform an ordinary dresser into a stunning focal point of any room. Let's dive in and learn how to achieve this stunning DIY project.

Materials Needed

  • Dresser
  • Wallpaper of your choice
  • Measuring tape
  • Scissors
  • Sponge
  • Wallpaper adhesive
  • Squeegee or smoothing brush
  • X-Acto knife

Step 1: Preparation

Start by preparing the dresser for wallpapering. Remove all drawers and hardware, ensuring the surface is clean, smooth, and free of dust. Sand any rough spots and wipe the dresser down with a damp cloth to create a clean canvas for your project.

Step 2: Measuring and Cutting

Measure the dimensions of each dresser panel and the corresponding wallpaper sections you'll be applying. Ensure you leave a few extra inches on each side for trimming and adjustments. Carefully cut the wallpaper to match the measured dimensions, using sharp scissors for precise cuts.

Step 3: Applying Wallpaper Adhesive

Apply wallpaper adhesive to the back of the wallpaper, following the manufacturer's instructions. Use a sponge or brush to evenly spread the adhesive, ensuring full coverage. Take your time to prevent any bubbles or creases from forming.

Step 4: Applying the Wallpaper

Starting from the top, carefully apply the wallpaper to the dresser panel. Use a squeegee or smoothing brush to remove any air bubbles and ensure the wallpaper adheres firmly. Repeat this process for each panel, taking care to align the patterns if necessary.

Step 5: Trimming and Finishing

Once all the wallpaper is applied, allow it to dry for the recommended time. Use an X-Acto knife to trim any excess wallpaper from the edges of the dresser. Make clean and precise cuts to achieve a professional look.

Step 6: Reassembling the Dresser

After the wallpaper is completely dry and trimmed, reassemble the dresser by placing the drawers back into their respective slots. Ensure all hardware is securely reattached and give the dresser a final wipe down to remove any remaining debris.

Conclusion

Congratulations! You have successfully wallpapered your dresser, adding a touch of style and uniqueness to your furniture. Remember to take your time during each step to achieve the best results. If you faced any challenges during the process, don't hesitate to reach out to the Frameworks team for assistance. We hope you enjoy your newly transformed dresser and the visual impact it brings to your space.

More posts